The Just Add Power HDMI over IP Rackmount Transmitter allows you to simultaneously send out 3 different HDMI 1.3 Signals (up to 1080p) to one or more HDMI video projectors or LCD/Plasma Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources (SkyHD, Blu-ray players. PS3, Computers etc) to up to 200 TV displays on a LAN by cascading Ethernet switches up to 3 levels, allowing the farthest display to be located up to 1,000’ away from the 1080p source device while sustaining excellent picture & sound quality.

Also available in the lineup are the HDMI over IP TX & HDMI over IP RX

Please note that this is Not an HDMI Balun, but an HDMI over IP system. This means you can create your own A/V Ethernet network and all of the recievers will find the transmitter automatically. It may even be used over smaller existing house networks and low cost LAN switches and routers.

Any HDMI source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using 3rd party Control systems you can control what signal is being watched at each location. Sophisticated Home Cinema installations can use an intelligent controller to control the system using RS232 commands.

What are the key benefits of the Just Add Power HDMI over IP Matrix solution compared to other Matrix Switchers?

1)  Scalability - it is simple to right-size the switch for the customers immediate needs, and when they add another TV or HD source to their collection, all they need to purchase is another Transmitter or Receiver.  With traditional Matrix switches you are buying into a fixed form factor that does not typically accommodate upgrading or expansion.

2)  Flexibility - you can put all of your sources in one closet, or you can distribute them throughout the home.  It is truly an anything anywhere to anything anywhere else solution.

3)  More Flexibility - you can mix match different resolution HDTV monitors on the network without having to lower the quality of your HDMI sources.  Other HD Matrix solutions typically require the owner to set the inputs to match the resolution of the least common denominator.  Because the HDMI over IP Receivers have a built in scaler, you can go ahead and set your HDMI sources to their highest resolution supported (1080p, 1080i, 720p, whatever).  This means the customer can enjoy their 1080p content on their main screens, and save some money by installing 720p screens for the kitchen or the kid's bedrooms.

4)  Even More Flexibility - if the customer has some legacy VGA, Component, or DVI sources that they want to continue using, it is simply a matter of using an HDMI converter (i.e. VGA+Sound>HDMI, Component+Sound>HDMI, or DVI+Sound >HDMI) to connect the legacy device into the HDMI over IP Matrix solution.

5)  Affordability - when you compare a legacy HDMI Matrix switch with all of the devices needed to distribute the signal throughout the home, the Just Add Power solution generally comes out as a better bargain.  No to mention the frustration of wondering if the long HDMI cables or the finicky Baluns will work with the necessary cable distances.  The Just Add Power solution can extend an HDMI source much farther than Baluns, and it is always reliable and consistent.

Buy Just Add Power HDMI over IP Transmitters % Receivers Now >>